Pool Place Power Tabs are designed to dissolve slowly (3-7 days) providing a steady source of available chlorine to control the growth of algae, kill bacteria and destroy organic contaminants.
METHOD OF APPLICATION: Use a floating dispenser, automatic chlorinator or feeder designed for this product, or place in skimmer. Use in a new chlorinating device or any device which has previously contained only this product or whose active ingredient is trichloro-s-triazinetrione. If placed in the skimmer, run the pump a minimum of 8 hours daily. Do not reuse floaters or feeders from other dry chlorinating products. Do not permit tablets to contact plastic pool linings or metal objects. Do not throw tablets directly into the pool. Do not use with any other tablets or sticks in the same skimmer, floater or feeder. Do not use in any chlorinating device which has been used with any other chlorinating compounds.
WATER BALANCE: To provide optimum product performance, swimmer comfort and crystal clear water, always maintain a pH from 7.2 to 7.6, total alkalinity from 90 to 125 ppm, and calcium hardness above 200 ppm. Test frequently using a reliable test kit or strip that measures all these ranges. Make any necessary adjustments promptly with the appropriate products.
ROUTINE CHLORINATION: Every week (or as needed): Add one 8 ounce tablet for each 10,000 gallons of pool water to maintain chlorine residual at 1-3ppm. Follow “Method of Application”. This dosage may vary depending upon bather load, water temperature and other conditions. Pool must not be entered until the chlorine residual is 1-3 ppm as measured with a reliable test kit or strip. As a preventative treatment, you must shock treat your pool once per week to prevent pool problems. In addition to weekly shock treatment, you must shock treat to remedy problems which may occur when bathing loads are high, water appears hazy or dull, unpleasant odors or eye irritation occur, after heavy wind and rainstorms, or if algae does develop with resulting green color and slimy feeling.
SHOCK TREATMENT: Adjust pH to 7.2 to 7.4 with appropriate product per label instructions. Shock treat weekly with Pooltown Shock to kill bacteria, control algae, burn out organic materials and to keep water sparkling clear. Follow label instructions.
